Filter brands
Brands
Compare reusable cloth nappies
Showing all 5 products
0 products shortlisted
Cost
Price
$13
$9
$43
$24.95
$22
Pack cost
$13
$9
$42.95
$24.95
$22
Largest pack size available
1
1
1
1
1
Recommended products
Recommended
Test results
CHOICE Expert Rating
Absorbency score
Leakage score
Rewet score
Leakage observed
Heavy
Heavy
Heavy
Heavy
Heavy
Sustainability
Country of origin
China
China
China
China
India
Comments
Claims
Not stated
No BPA or phthalates
Australian design, ethically produced in China, leak-free functionality, made with recycled materials
Not stated
Vegan, cruelty free, Australian owned, female founded, designed in Australia, hypoallergenic
Wash instructions
Separate absorbent insert from nappy and wash both according to the following instructions.
Wash before use
If soiled, empty contents into toilet and rinse off any residuals prior to washing
Cold gentle machine wash with similar colours
Do not use fabric softeners or bleach
Do not tumble dry
Line dry in shade
Do not iron or dryclean
Remove absorber/liner and solids from nappy. Light rinse before wash if required. Warm machine wash (max 40 degrees C).
Do not rub, soak or wring. Do not bleach. Do not use fabric softeners. Do not tumble dry.
Line dry in shade (nappy shell only). Do not iron. Dry thoroughly before re-use or storage. Do not dry clean.
Remove solids - drop poo in the loo and store the used nappy in a dry pail.
Prewash cycle - run a prewash cycle 40-60 degrees with mild detergent every 1-2 days. Store nappy in a dry pail until the main wash.
Main wash cycle - run a long main wash cycle 40-60 degrees with mild detergent every 2-3 days.
Hang to dry - air dry nappies or tumble dry on low.
Remove soiling into the toilet
Remove absorber
Store nappy in a dry bucket awaiting washing (no soaking required)
Warm machine wash using only half strength detergent
Line or tumble dry on a low heat.
1. Remove solids and rinse (or pre-wash) with cold water.
2. Machine wash at <60 degrees. Do not use fabric softeners.
Do not use bleach. Do not dry clean. Do not soak. Do not iron.
3. Line dry in the shade or gentle tumble dry. Bright colours may fade over time.
4. Close velcro tabs on nappies before washing them.
Materials used
Nappy outer: Polyester with polyurethane backing.
Nappy lining: Polyester.
Absorber: Layer 1 & 2: Polyester. Layer 3: Viscose from Bamboo/Polyester
Nappy outer: Polyester/polyurethane laminate.
Nappy lining: Polyester.
Absorber: Bamboo viscose/cotton/polyester
Nappy cover: 100% recycled polyester outer with TPU lining, 100% recycled polyester suede inner.
Nappy inserts: 85% Bamboo viscose, 15% recycled polyester.
100% Polyester polyurethane coating (absorber: bamboo/cotton)
Outer layer: 100% polyester with PU Laminate. Inner: 100% polyester.
Lining: 90% polyester and 10% spandex
Tips for use
Before placing the insert into the nappy, fold the insert into thirds
With the stay dry panel against baby's skin, snap absorber into place under the front flap OR push the insert through the back pocket all the way to the front
Place a Big Softies liner (sold separately) on top of the nappy before fastening onto baby
Firmly fit to baby's body using waist and crotch snaps if needed
Big Softies towelling or flannelette nappies (sold separately) can also be used as an absorber when folded to fit correctly.
Adjust the leg elastic to size required.
Fold the bamboo blend trifold absorber into thirds. It can be placed in the pocket or laid on top of the nappy.
A disposable liner or an extra overnight absorber can be added for extra comfort, convenience and protection. Further details for use included on packaging.
Choose nappy size using the adjustable snap button.
Choose absorption level by folding the bamboo inserts to size.
Choose a nappy style and what goes next to bub's skin -
stuff the insert inside for a pocket nappy with our stay dry inner next to baby's skin, OR
snap on the insert for an all-in-2 nappy with our bamboo insert next to baby's skin.
1. Adjust size by selecting leg elastic setting. The internal leg elastic adjusts like a bra strap. Just re-adjust as baby grows.
2. Snap bamboo insert into place with stay-dry panel against baby's skin (can also be used "pocket style").
3. Fit to body.
Night time: add a Night Booster.
Adjust for size: tighten the nappy by snapping the press studs together to find the best fit.
Add booster or liners as needed.
Pull front of nappy up to just below the belly button.
Tuck and smooth - pull across the waist tabs ensuring not too tight.
Instructions before first use
Wash before use
Wash before use
Soak inserts overnight in warm water, wash inserts and covers with detergent, and dry.
Wash prior to use with like colours. Use only 1/2 strength detergent. Pre-wash absorber several times to enhance performance.
None
Features
Weight range
4-14kg
Up to 16kg
3.5-16kg
Up to 16kg
Not stated
Unisex
Nappy size
One size
One size fits most
One
One
One size fits most
Related products
Availability
Tested model
Tested model
Tested model
Tested model
Tested model