CHOICE recommends front loaders that score at least 80% overall and 80% for dirt removal, and top loaders that score at least 70% overall and 70% for dirt removal. We don't recommend machines with less than 55% in any score.

This overall score is made up of dirt removal (40%), rinse performance (20%), gentleness (15%), water efficiency (15%) and spin efficiency (10%).

We measure dirt removal with a spectrophotometer, a machine that's more accurate than the human eye and can detect differences of about 6%.

We measure how well the machines keep dirt suspended in the water rather than depositing it back on the clothes, and how well they rinse out detergent by adding a marker chemical at the start of the wash, and measuring how much of it remains in the rinse liquor at the end of the cycle.

We test how gentle a washing machine is on clothes by attaching swatches of loose weave fabric to our test load, then measuring how much has frayed off by the end of the cycle. The less fraying, the higher the gentleness score.

This shows you how efficiently a washer uses water. To compare efficiency between different-sized machines, we calculate the amount of water used per kilogram of laundry. The lower the water consumption per kilogram, the higher the efficiency score.

The test load is weighed before and after each wash. Higher scores mean more water is removed, which means the washing takes less time to dry. We use the default spin speed (some machines let you vary the speed).

The amount of water used during the entire program cycle.

The amount of energy used per laundry cycle. A washer generally makes up around 0.53% of annual household energy usage. The smaller the number, the lower your running costs.

The amount of time the program cycle we selected took. This can range from under an hour to over three hours.

The maximum noise level is recorded during the spin cycle and is measured one metre away from the machine and one metre above the ground. Typically, the noise level of these machines is similar to that of a normal conversation (about 65dB). It's not an absolute measurement, the acoustics of your home will determine exactly how a machine sounds in use, but it's a good comparative measure.

The wash program stated on the energy label of the machine. Manufacturers tend to choose a program that uses the least power and water to attain the most stars possible, even though you probably won't use this program yourself; Most people use a normal wash.

The energy use as stated on the label, based on 365 uses per year.

Energy star rating based on a formula that incorporates the energy used per wash and the claimed capacity of the machine in kg.

Manufacturers must declare how many litres of water are used per wash cycle on the WELS star rating label. This label also lists the program and settings used for registration.

Manufacturers must declare how many litres of water are used per wash cycle, and the WELS water star rating is derived from this. The water use and the star rating are displayed on the product's WELS label.

Claimed program time achieved running the energy star program on full load.

These are taken straight from our brand reliability survey, but do not add to the overall score and refer to the brand only, not that particular model. "Not available" means we received less than 50 responses for this brand, which is not enough to be statistically significant.

Scores are taken from our product reliability survey, do not add to the overall score, and refer to the brand, not a particular model. Satisfaction score: We ask owners to tell us what they thought of the products they own, then give each brand a satisfaction rating so you can see what people who already own this brand washing machine think of them. "Not available" indicates we received less than 50 responses, which isn't enough to be statistically significant.

A measure of how well a manufacturer responds in the advent of an issue with one of their appliances. The score refers to the entire brand, not a specific model It is taken from our product reliability survey and does not impact the overall score. 'Not available' indicates we received less than 50 responses for this brand.

Most washer manufacturers make a family of models that are based on a common platform but offer different features and programs, often at different pricepoints, and sometimes allowing a retailer to offer an exclusive product, though the core performance will be identical.

Any differences between models that we've been able to ascertain.

We list whether a model is the tested model, an identical model to the one tested, a discontinued model or one that may be similar or related to a tested model.

The manufacturer's recommended retail price. Prices are generally flexible, so shop around both online and in bricks-and-mortar shops for options.

Approximate cost over 10 years for one daily load on a 'normal' cycle, based on 30c/kWh for electricity and $2 per 1000L for water. Excludes detergent (which can be a third of the cost).

This is the claimed capacity. We find people rarely fill their washer to full, so base your decision on how heavy your common load is. Weigh it on your scales.

We test on a normal, cold wash or the closest approximation to it, because that's how most Australians wash. You'll sometimes see differences between what the energy and water labels say on the machine and our results, because these are calculated on a warm wash, and potentially a different program.

Since most Australians wash in cold water, we've applied a small penalty in our overall score to models that can't do a proper cold wash (our water is at 20 degrees C) on their 'normal' cycle.

Some machines require both hot and cold water to operate, whereas others (typically front loaders) have an internal heater and only require a cold water connection. A front loader with the option to connect to a hot tap can reduce your running costs if you have solar hot water.

Washers require a minimum water pressure in order to function correctly. You can check with your local water supplier for the water pressure to your house.

Where washers accept a hot water source, there can be a cap on how high the temperature can be before it affects the hose or internal mechanisms. Usually this can be regulated by your heater, or a tempering valve can be fixed to the inlet if your water temperature is higher than accepted.

p'Drum' refers to a front loader with a drum that rotates on a horizontal axis, picking your clothes up and dropping them in the wash water. 'Impeller' refers to a top loader with a slimline 'propeller' in the bottom of the drum. 'Agitator' refers to a big 'spike' in the middle of the toploader drum which stirs the water around./p

The dimensions listed are the smallest figures claimed by the manufacturer. Some manufacturers don't include door width in their claimed dimensions, so make sure you double check this prior to purchase.

Stated warranty of the machine (not the parts). You're still covered by the Australian Consumer Law regardless of the manufacturer warranty.

The model has a claimed origin somewhere on the model itself. This should be taken with a grain of salt, as it's rare that all the materials for a product came from the one country.

Clicking a link will take you to a retailer's website to shop, where available.

An option for small/lightly soiled loads which shortens the selected program or reduces cycle time. May also be called 'fast', 'quick', 'rapid' or something else. Some machines also offer temperature variations in conjunction with faster washes.

This can help you save water, energy and time by automatically adjusting the water level according to the load and/or fabric type. Some machines also adjust the washing action.

The machine automatically detects and redistributes an out-of-balance load, either by spinning slowly before the full spin cycle or by taking in more water (which is what many top loaders do). If you're concerned about high water use, opt for a machine without this feature or go for a front loader. ns Not stated.

You can change the spin speed on some programs. A higher spin speed will result in drier clothes, but you might want a lower speed for delicates or easily creased fabrics. The higher the spin speed, the more likely your clothes will be stiff when they come out of the wash.

Some machines have an extra-gentle wash cycle for garments labelled as only suitable for handwashing, including woollens, silk and cashmere. The program uses different washing actions such as less water.

An extra rinse can be useful if your wash hasn't removed all the detergent, leaving white marks behind, or if you have sensitive skin which reacts to laundry detergent. May be an extra run at the end of a program, or a standalone (rinse and spin) program.

Many machines now have self-cleaning lint filter systems, while others use the traditional mesh trap in the wash drum that you have to clean manually. It's mostly top loaders that have lint filters; front loaders tend not to need them because they're gentler on clothes.

'Delay time' or 'time delay' is a feature that lets you program the wash to start at a specific time in the future. If you're on off-peak energy, you can take advantage of this feature.

Time remaining display will give you a rough estimation of how long the load will take to wash. This can often fluctuate wildly as some washers use sensors to detect how dirty your wash is, the type of load you've put in and how much you've put in, then adjust the timing.

Allows you to specify a program, then hit the memory button so you don't have to program the same set of steps every time you run the washing machine.

This will lock the door opening if the washing machine is in operation. Many front loaders do this by default.

Activating this feature means the controls cannot be adapted after a program has started. The downside is that you can't cancel the wash to put something else in, but the upside is that your child's wandering hands can't cancel a wash and waste the water and energy for that run.

Sometimes available on top loaders because of their capacity to use a lot of water, most front loaders don't use much water so the need for this feature is less useful. If a washing machine uses over 100L for a cycle we note the lack of a water save option as a bad point.

This might be useful for some if your laundry is not well-lit and you're reaching around in the dim light for that recalcitrant sock.

This gives you the capability to store a whole litre or so of liquid detergent in the machine and it will auto dose itself based on your program. You can either use a manufacturers proprietary detergent or your own choice of liquid detergent for the best of both worlds.

Another rare feature, this might be useful if you want the door to open so it dries the seal (we've had complaints about mould on front loader seals).

Most front loaders allow you to pause the wash and ad extra items in the first few minutes of the cycle but after water gets to the door, it's a no-go unless you cancel the wash and start again. Most top loaders allow you to open the lid at any point.

These are features we've seen that are unusual. We don't normally test them as they tend to be driven by marketing hype, but they might be of interest to you. nt Not tested.